high · CVSS v3 7.8

CVE-2026-98739

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix initial port reference race F…

Description

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix initial port reference race For RFCOMM_RELEASE_ONHUP devices, rfcomm_tty_install() and __rfcomm_release_dev() both use RFCOMM_TTY_OWNED to decide who drops the initial tty_port reference. The release path tests the bit separately from the install path setting it, so both can drop that reference. The synchronous hangup does not prevent this race: port->tty is not assigned until tty_port_open(), after installation. The following interleaving is possible: 1. Install and release each obtain a reference with rfcomm_dev_get(). 2. Release observes RFCOMM_TTY_OWNED clear. 3. Install sets RFCOMM_TTY_OWNED and drops the initial reference. 4. Release drops the same initial reference again. 5. TTY cleanup drops its reference and frees the device. 6. Release performs its final tty_port_put() on the freed port. KASAN reported: BUG: KASAN: slab-use-after-free in tty_port_put+0x22/0x190 Write of size 4 at addr ffff8881001d3d5c by task poc/92 Call Trace: tty_port_put+0x22/0x190 rfcomm_dev_ioctl+0x1d4/0x1930 sock_do_ioctl+0x110/0x260 sock_ioctl+0x380/0x590 __x64_sys_ioctl+0x134/0x1c0 Allocated by task 88: rfcomm_dev_ioctl+0x8f6/0x1930 sock_do_ioctl+0x110/0x260 sock_ioctl+0x380/0x590 __x64_sys_ioctl+0x134/0x1c0 Freed by task 65: kfree+0x131/0x3c0 rfcomm_dev_destruct+0x23b/0x2f0 release_one_tty+0xc1/0x370 process_one_work+0x661/0x1090 Use test_and_set_bit() in both paths so that only the caller that changes RFCOMM_TTY_OWNED from clear to set drops the initial reference. Each path keeps its own lookup reference until release or TTY cleanup, preserving the existing callback ordering and error handling.

Scores

Severity
high
CVSS v2
7.2
CVSS v3
7.8
CVSS v4
—
EPSS
—

← All CVEs

Related CVEs

high

CVE-2026-98788

In the Linux kernel, the following vulnerability has been resolved: futex: Fix private hash use-after-free on resize poll_state_synchronize_rcu(mm->futex.phash.batches) is used by futex_ref_drop() to check that a grace period has passed since the current hash was published. This relies on batches referencing a grace period which started after the hash pointer was assigned. __futex_pivot_hash() sets mmph->batches before it replaces mmph->hash: scoped_guard(rcu) { mmph->batches = get_state_synchronize_rcu(); rcu_assign_pointer(mmph->hash, new); } The scoped_guard(rcu) doesn't stop new grace periods from starting, and if one starts between those two assignments, futex_ref_drop() can move forward while a reader still holds a pointer to the old hash. Fix things by setting mmph->batches after assigning mmph->hash. The scoped_guard(rcu) isn't needed, so let's drop that as well.

View analysis

high

CVE-2026-98858

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix task_work add use-after-free with SQPOLL For SQPOLL, the sqpoll thread runs task_work off its own list and doesn't need to be told about it, so it can pop and complete a request as soon as mpscq_push() has published it. If that was the last request holding the ring alive, io_ring_exit_work() then frees the ctx, stops the thread, and with it the tctx, while io_req_normal_work_add() is still looking at both after the push: BUG: KASAN: slab-use-after-free in io_req_normal_work_add+0x439/0x510 Read of size 4 at addr ff11000000ca0000 by task repro/55 (...) BUG: KASAN: slab-use-after-free in queue_work_on+0x25/0x70 Write of size 8 at addr ff11000000c3bd00 by task repro/55 Hold an RCU read lock across the add, like io_req_local_work_add() already does, and have io_ring_exit_work() wait for a grace period for SQPOLL rings as well before freeing the ctx.

View analysis

high

CVE-2026-98862

In the Linux kernel, the following vulnerability has been resolved: audit: fix exe mark UAF in kill_rules() kill_rules() removes mixed AUDIT_DIR and AUDIT_EXE rules when an audit tree is pruned. It drops entry->rule.exe before removing the rule from the RCU-visible filter lists. After a rule has been installed with AUDIT_ADD_RULE, which requires CAP_AUDIT_CONTROL, removing the watched directory can race with another task that is still evaluating the rule. In that case, fsnotify can free the executable mark before the reader reaches audit_mark_compare(), causing a use-after-free. KASAN reports: BUG: KASAN: slab-use-after-free in audit_mark_compare+0x8d/0xa0 Unlink the published rules from the RCU-visible lists and retain them on tree->rules for cleanup. If any rule has an executable mark, wait for a single RCU grace period before removing the marks and scheduling the entries for freeing. Otherwise, call_rcu() already provides the required deferred freeing without a synchronous wait.

View analysis

high

CVE-2026-98682

In the Linux kernel, the following vulnerability has been resolved: smb: client: drain and invalidate before server-side copy/clone cifs_file_copychunk_range() and the clone (FICLONE) path of cifs_remap_file_range() do not serialise the destination page cache against the server-side copy the way the other server-side range operations (smb3_zero_range(), smb3_punch_hole(), smb3_collapse_range() and smb3_insert_range()) do. cifs_file_copychunk_range() invalidates the destination range with filemap_invalidate_inode(), which takes and drops the mapping's invalidate_lock internally, so the lock is no longer held when the copychunk ioctl is issued. It also never drains in-flight netfs I/O on the target. The clone path never takes the invalidate_lock at all (only i_rwsem), uses a bare truncate_inode_pages_range() and likewise does not drain outstanding I/O. As a result an asynchronous destination writeback can complete after the server-side copy/clone has run and reinstate stale data over the region just written by the server, corrupting the file. This is the same class of corruption as commit d7d2adcd022b ("smb/client: flush dirty data before punching a hole") and has been seen randomly in generic/363 against Windows Server. Fix both paths to follow the established ordering: hold the target mapping's invalidate_lock across the flush and invalidation of the destination and the server ioctl, and call netfs_wait_for_outstanding_io() on the target to drain in-flight writes before the ioctl is issued. Only the target inode's invalidate_lock is required, as the source is merely flushed and not invalidated; i_rwsem (already held via lock_two_nondirectories()) is acquired before the invalidate_lock, matching the VFS lock ordering. Since filemap_invalidate_inode() takes that same lock internally, replace it with its own unmap/flush/invalidate steps instead of calling it, and return early on a zero-length copy to avoid a range underflow.

View analysis