low · CVSS v3 3.3

CVE-2026-98761

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: recover after failure to start the…

Description

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: recover after failure to start the frs ams Reset the port if the tcpm fails to start the FAST_ROLE_SWAP AMS by initiating error recovery on it. This helps in cases where some cables (incorrectly) signal an FRS to an FRS capable port during disconnection. The TCPC autonomously starts sourcing VBUS on detecting the FRS signal. However, the VBUS sourcing is left on when the FAST_ROLE_SWAP AMS fails to start (as tcpm_sink_tx_ok is 0 as CC is open due to the cable disconnect). This is because the code sets the state to INVALID_STATE without resetting the port state. Log snippet before changes: [ 101.401960] AMS FAST_ROLE_SWAP start [ 101.401971] Sink TX No Go [ 101.401982] sourcing vbus [ 101.401987] VBUS on [ 101.402159] VBUS on [ 109.257809] CC1: 0 -> 0, CC2: 5 -> 0 [state SNK_READY, polarity 1, disconnected] [ 111.267442] VBUS on After changes: [ 70.541211] AMS FAST_ROLE_SWAP start [ 70.541220] Sink TX No Go [ 70.541228] state change SNK_READY -> ERROR_RECOVERY [rev3 NONE_AMS] [ 70.541362] VBUS on [ 70.541365] sourcing vbus [ 70.541367] VBUS on [ 70.541374] state change ERROR_RECOVERY -> PORT_RESET [rev3 NONE_AMS] [ 70.541410] disable vbus discharge ret:0 [ 70.543028] Setting usb_comm capable false [ 70.544009] Setting voltage/current limit 0 mV 0 mA [ 70.544034] polarity 0 [ 70.544239] Requesting mux state 0, usb-role 0, orientation 0 [ 70.555550] cc:=0 [ 70.555595] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS] [ 70.555697] VBUS off [ 70.555702] VBUS VSAFE0V [ 70.555762] CC1: 5 -> 0, CC2: 0 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 70.587794] VBUS off [ 70.587799] VBUS VSAFE0V [ 70.655672] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 70.655682] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev3 NONE_AMS] [ 70.655686] Start toggling [ 70.656274] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]

Scores

Severity
low
CVSS v2
3.6
CVSS v3
3.3
CVSS v4
—
EPSS
—

← All CVEs

Related CVEs

low

CVE-2026-98700

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: set info->band for 802.3 encap offload frames Unlike the 802.11 TX paths, ieee80211_8023_xmit() does not set info->band from the channel context on non-MLD interfaces. It stays at 0, so ieee80211_get_tx_rates() uses the wrong band for these frames. Set it the same way as ieee80211_build_hdr(): drop the frame if there is no channel context, and leave the band at 0 on MLD interfaces.

View analysis

low

CVE-2026-98855

In the Linux kernel, the following vulnerability has been resolved: of/overlay: put property on deadprops only after changeset add succeeds add_changeset_property() links a new property of a not-yet-live target node into the node's deadprops list before handing it to of_changeset_add_property(). If that fails, the error path frees the property but leaves the freed pointer linked in deadprops, and of_node_release() frees it a second time when the aborted overlay's node is released. Record the changeset entry first and link the property into deadprops only on success. of_changeset_add_property() never looks at the node's property lists, so the order of the two steps is otherwise immaterial, and the error path frees a property that nothing references.

View analysis

low

CVE-2026-10813

LMCache versions 0.3.1 through 0.5.4 contain a weak-hash issue in the vLLM KV Cache Handler's hex_hash_to_int16 function. The flaw requires local access and high complexity, but it could affect cache integrity in deployments using LMCache with vLLM. Upgrading to 0.5.5 addresses the issue.

View analysis

low

CVE-2026-111602

The LatePoint appointment booking plugin for WordPress contains a sensitive information exposure vulnerability in versions up to 5.7.4. Unauthenticated actors can leverage the customer UUID parameter in an AJAX endpoint to harvest customer PII under specific guest checkout configurations. This matters because it directly compromises customer privacy and exposes user data.

View analysis