medium · CVSS v3 5.5

CVE-2026-98763

In the Linux kernel, the following vulnerability has been resolved: usb: core: clear both ep_in and ep_out for non-ep0 c…

Description

In the Linux kernel, the following vulnerability has been resolved: usb: core: clear both ep_in and ep_out for non-ep0 control endpoints In usb_enable_endpoint(), non-zero control endpoints (where usb_endpoint_xfer_control(&ep->desc) is true) populate both dev->ep_in[epnum] and dev->ep_out[epnum] with the same struct usb_host_endpoint pointer. However, usb_disable_endpoint() only clears either dev->ep_out[epnum] or dev->ep_in[epnum] depending on the direction bit of epaddr when reset_hardware is set, leaving the opposite direction's array slot pointing to the disabled/freed endpoint. Clear both dev->ep_out[epnum] and dev->ep_in[epnum] when disabling a non-ep0 control endpoint with reset_hardware set, and update the function kerneldoc accordingly. Tested in QEMU against Linux 7.3.0-rc3 using dummy_hcd and raw-gadget to enumerate a USB device with a non-zero control endpoint (bEndpointAddress 0x01, bmAttributes USB_ENDPOINT_XFER_CONTROL), verifying that both dev->ep_in[1] and dev->ep_out[1] are cleared when the interface is disabled.

Scores

Severity
medium
CVSS v2
4.7
CVSS v3
5.5
CVSS v4
—
EPSS
—

← All CVEs

Related CVEs

medium

CVE-2026-98723

In the Linux kernel, the following vulnerability has been resolved: nvmet: copy the hostid into the ctrl before creating PR pc_refs Commit 6202783184bf ("nvmet: Improve nvmet_alloc_ctrl() interface and implementation") added a second uuid_copy() of args->hostid near the end of nvmet_alloc_ctrl(), and commit 7b658153f1b8 ("nvmet: Remove duplicate uuid_copy") removed the original copy that sat before nvmet_ctrl_init_pr() instead of the new one. Since then nvmet_ctrl_init_pr() snapshots ctrl->hostid into the per-controller per-namespace reservation refs while the uuid_copy() from the connect data runs later, after the controller is published. The ctrl is allocated with kzalloc(), so every pc_ref created on this path stores the nil UUID. pc_ref->hostid has a single consumer: nvmet_pr_set_ctrl_to_abort() matches it against the preempted registrant's hostid to kill and drain the victim's in-flight I/O for Preempt and Abort. The match can never hit with the nil UUID, so whenever a namespace with reservations enabled exists before a host connects, which includes every reconnect, Preempt and Abort silently degrades into a plain Preempt: the preempting host sees success while the victim's in-flight I/O is still in the air. Copy the hostid where the rest of the connect data is consumed, before the controller is published and before nvmet_ctrl_init_pr() takes its snapshot.

View analysis

medium

CVE-2026-98675

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: handle Phase C dip events in IRQ1 handler ADE9000_ST1_CROSSING_DEPTH is the exclusive upper bound for scanning the STATUS1 event bits, so a value of 25 left out the highest event bit, ADE9000_ST1_DIPC_BIT (bit 25). Phase C dip events were never reported. Bump the value to 26 so bit 25 is scanned.

View analysis

medium

CVE-2026-98676

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: fix NULL pointer dereference in clkout registration ade9000_setup_clkout() passes NULL as the register address when registering a divider clock. During clock registration, the common clock framework calls clk_divider_recalc_rate(), which dereferences the address through readl(). As a result, probing an ADE9000 configured as a clock provider with an external input clock crashes. CLKOUT passes CLKIN through without changing its rate. Register it as a 1:1 fixed-factor clock, which does not require register access. This change does not affect the configuration using the internal clock, for which the driver does not register a clock provider.

View analysis

medium

CVE-2026-98678

A Linux kernel iio ADC driver for the AD4030 had an input validation flaw that allowed zero or negative oversampling ratios to be processed, potentially causing undefined behavior. The issue was fixed by validating the value before computing its logarithm. This matters because it could lead to kernel instability or incorrect ADC data on affected systems.

View analysis